Available Now the latest version of ABIOS ® p>
Available Now the latest version of CONSERVER ® p>
Nationalmuseum
Stockholm
If you are already a user please enter your email address and password to proceed with authentication
Email
Password
Login
Password forgot?
Registration
The CONSERVER® is an appareil that was created for the vacuum preservation of paper materials but, its versatility allows using it with different kind of objects. In fact it is used also for the preservation of wooden materials or metal objects in order to prevent oxidative processes.
For over 10 years the CONSERVER® has been the most popular equipment in Archives and Libraries.
The CONSERVER® removes the air contained in a special plastic envelope which can be used for preserving a book, a file or a particular object and consequently, it creates an adjustable vacuum level and then seals hermetically the envelope itself. Consequently, the object is isolated from the outside, remaining in contact with very little air and hence protected.
The CONSERVER® is composed of two parts: the main unit and an auxiliary part that can be used to extend the dimensions of the working plane.
Through the main unit, it is possible to check all the operating parameters and make some adjustments.
Birth of CONSERVER® - The Challenge of RGI
The idea of creating the CONSERVER® was born in the late nineties was when important Managers of Libraries and Archives expressed the need for a low-cost and high quality machine that would allow to preserve paper materials in a secure way and, at the same time, make it easily storable.
After some improvements, the CONSERVER® has become the most popular machine in Archives and Libraries for about 10 years: this is due to the specific designing developed for meeting the real needs of these Organizations: it contributes to the success of this machine.
Features of the CONSERVER®
Compared to others machineries on the market, the CONSERVER® has been designed with high engineering standards and, at the same time, maintaining an extreme simplicity of use.
The first distinction that must be noted between the CONSERVER® and other vacuum machinery is the vacuum rate that can be applied to objects. Other apparatus , called “bell-shaped”, which come from the world of food preservation, tend to reach the maximum vacuum in a fraction of a second, and it may imply the risk of damaging treated objects. The CONSERVER® reaches the required vacuum level slowly, or it is also possible to set a manual adjustment in order to reach the desired vacuum level gradually.
Another great advantage of the CONSERVER®, which distinguishes it from other similar products, is the possibility of using envelopes of different sizes. In other words, the CONSERVER® allows choosing the optimal size of the envelope; in fact it is possible to choose between different formats that depend just on the size or volume of the object.
A very popular feature of the CONSERVER is the size of the welding bars that are very wide, it means that it is possible to create envelopes with sealable side up to 53 cm and this is very important for the packaging of large objects.
The convenience of the CONSERVER® does not only consist in the purchase price, but also in the great economy of its using and its low maintenance. It is easy to verify this, for example, by just considering the type of used pumps, that are dry, with long maintenance time and that do not require either the replacement or checking the level of the lubricating oil.
Evolution of CONSERVER®
The CONSERVER® system has undergone considerable functional and engineering improvements.
RGI is always available to study and design special machineries and CUSTOMIZED CONSERVERS® with different featuress from the standard version, in order to suit specific customers’ needs.
1. Applications of CONSERVER®
The uses and purposes of the CONSERVER® are numerous: Protected Conservation of objects; the stiffening of breakable paper materials; the better Reserved and Secure Vacuum Storage of objects; the Rigidity of archived materials; the Reduction of conservation/storage spaces; the Protection of wet paper materials.
Normally the application of vacuum preservation is carried out to paper materials and to the field of Cultural Heritage, in reality the scope of application is much wider, in fact it can be extended to the industrial sector such as chemical and food industries.
Protected Storage
Enemies of materials are many, such as: dust, humidity, air pollution, insects, microorganisms, water, the oxygen in the air, the light itself, without forgetting all risks that may be caused by disasters, such as flooding.
The CONSERVER® is also very suitable for preserving antique paper materials due to the possibility of regulating the vacuum. Because of this feature any material and, therefore any kind of object, can be protected from oxidizing and corrosive chemicals (acids) that are present in the air.
Safe Storage
A direct consequence of the vacuum conservation is to protect treated objects from unauthorized accesses. The opening of the enclosures implies the cutting of the envelope which would leave an obvious sign of forced entry. The restoration of the vacuum enclosures and the sealing involve necessarily the use of the CONSERVER®.
Reserved Storage
Through the CONSERVER® it is possible to combine both the protection provided by enclosures and the possibility of concealing contained objects from prying eyes. In fact RGI is able to provide customers with special envelopes equipped with an additional aluminium thin layer that protects preserved objects from all light frequencies, but also from prying eyes.
Hardening of Stored Materials
The CONSERVER® has become very popular among the newspaper libraries as the preservation of newspapers and magazines has always created a lot of problems, both in terms of quality of preservation and ease of storage and consultation.
The CONSERVER® permits to create enclosures with different vacuum levels and to obtain high rigidity to paper materials which usually are yielding and/or flexible.
CONSERVER® allows storing newspapers and magazines in vacuum enclosures which guarantee rigidity to them and consequently, they can be stored in an upright position, as they would be conventional hardcover books: in this way they can be catalogued and consulted easily.
Reduction of Space
The CONSERVER® allows reducing the storage space that is occupied by the preserved material; in the case of paper material – such as administrative practices, magazines or newspapers – it is possible to obtain a reduction of volume up to 40%.
Protection of Wet Materials
In the event of flooding and/or inundation, the key of successful protection consists in undertaking immediately actions in order to prevent the formation of mold and funghi.
Having adequate pieces of equipment, that allows taking immediate actions, could prevent a serious accident becoming a disaster.
In fact, it is known that the worst consequences on paper material, which is damaged by water, are not only that you can see immediately, but primarily those related to delays in restoration and drying. Immediately after of being affected by water, paper materials are subjected to strong attacks especially by mold which, in presence of air, could cause serious damages even during the first week after the soaking. Unfortunately it was observed that sometimes remediation actions were taken on several months after the soaking, with disastrous consequences for books, folders, paper materials and so on.
The CONSERVER® permits to isolate and seal the wet material in a very short time, slowing drastically the formation of mold and fungi and avoiding serious damages caused by fungal infections without involving cryogenic processes that are very difficult and expensive.
Moreover, paper materials that had most of the water removed by using the CONSERVER® had also another very important advantage: in fact defects of planarity and/or undulation were drastically reduced or eliminated. These defects are not removed by using cryogenic processes.
2. Optional Devices
The CONSERVER®, in all versions "Standard", "Power", "Special", on request can be equipped with "DRY" optional device. This optional allows the use of CONSERVER with wet material, being able to extract the water.
Technical Data of CONSERVER®
|
STANDARD |
POWER |
SPECIAL |
Maximum width of the envelope on the open side |
52.5 cm |
52.5 cm |
Customizable |
Maximum length of the envelope |
No limit |
||
Support surface for the artwork (without auxiliary plane) |
60 x 22 cm |
60 x 22 cm |
Customizable |
Removable auxiliary support surface (extension) |
60 x 66 cm |
60 x 66 cm |
Customizable |
Sealing |
Thermal, thermo-controlled, 6 mm width |
||
Sealing bar |
Teflon-coated, manual handling and automatic operation |
||
Vacuum Chamber |
Useful surface 52.5 x 7.5 cm, with manual closure |
Useful surface 52.5 x 7.5 cm, with manual closure |
Customizable |
Minimum pressure |
110 mbar |
10 mbar |
110 mbar/10 mbar |
Maximum suction flow |
32 litres of air per minute @ 50Hz |
60 litres of air per minute @ 50Hz |
32/60 litres of air per minute |
Supply voltage |
220/230 V. 50 Hz |
||
Voltage of the internal electrical system |
12V |
||
Power consumption |
Suction 200W max Welding 160 W max |
Suction 270W max Welding 160 W max |
Depending on the chosen option |
User Interface |
- Led buttons - Handle for the vacuum regulation - Control lights |
||
Display |
Alphanumeric 20x4 characters Blue backlit led.
|
Alphanumeric 20x4 characters Blue backlit led.
|
Alphanumeric 20x4 characters Customisable RGB colour backlit led. |
Vacuum suction |
Controlled and monitored electronically |
||
Instrumentation |
- Precision vacuum gauge - Welding time on the graphic bar - On display user guide with user interaction |
||
Activations |
- Complete cycle - Welding cycle only - Reset - Manual vacuum chamber - Manual vacuum regulation - Manual handling sealing and automatic activation |
||
Management and |
Microprocessor technology for management of work phases, control actuators, Error Check, Safety |
||
Frame and Chassis |
Neutral anodized aluminum |
||
CE Mark |
According to Eu Directive 765/2008 |
||
Weight |
23 Kg, including auxiliary bolster |
24.6 Kg, including auxiliary bolster |
Depending on the choice |
Dimensions (H x W x D) (excluding auxiliary bolster) |
60 x 50 x 33 cm |
60 x 50 x 33 cm |
Depending on the request |
Business information
Please, do not hesitate to contact us if you require any information, our references or further details about our machineries: it will be a real pleasure for us.
For any technical or commercial information about products please, contact us directly, or fill out our contact request form by clicking HERE.